HELP, R50 Cleaned MAF and TPS Now Drama's

jeffs5
Been here a while
Posts: 473
Joined: August 16th, 2009, 9:46 pm
Location: Adelaide, SA

HELP, R50 Cleaned MAF and TPS Now Drama's

Unread post by jeffs5 » May 23rd, 2013, 5:25 pm

Howdy all, I done bad, I bought some MAF cleaner ( CRC Maf cleaner ) Took it out sprayed it and yep it was filthy, Anyway this is where I shouldn't of touched, looked up near inlet and took of the TPS and cleaned that, now it has adjustment in it where its mounted you can turn it, anyway I put it back on in same position ( It was centre) and since have had nothing but drama's High idle, erratic gear changes (auto) Have mooved it here and there and thought I had it running back to normal but still weird gear changes and idle. Can anyone steer me straight, I've done the setup per manual, operating temp, turn off, turn to on for 1 second, start and run for 30 seconds, pull off top plug, put it back on within 5 secs, 20 seconds later rev a few times. After doing this it does come back to 750-800 RPM but still the erratic gear changes......HELP PLZZZZZZZ!!! :boggle: :boggle:

Return to “Pathfinder”