have recently taken my tb42e off gas and gone back to straight fuel have put new fuel pump changed the lines new filter and reco injectors but go to start and pump primes gets fuel and lots of spark and wont fire up...., but if i spray "start ya bastard" it will fire up and burn that off then die can some one help me out
i have converted a tb42 to tb42e and now it wont start, have changed entire harness over and all came out of a working car, the only thing i have changed is the fact that it will no longer be running gas. if i aspirate fuel ddown the air intake, she'll fire but die after she burns that. have power to injectors and the fuel pump is working. as far as i can work out there is no pulse going to the injectors. does anyone have any ideas as to where i could start?
2 posts • Page 1 of 1
- Getting to know the place
- Posts: 11
- Joined: March 29th, 2007, 4:29 am
- Location: Brisvagas
- Avid Poster
- Posts: 725
- Joined: June 18th, 2009, 1:09 pm
The Gas/ Petrol switch turned off the injectors so you need to trace the wires that were connected to it.