MK Triton Bullbar Mounting Bracket

Triple diamond talk
Donisgood
Here and there
Posts: 92
Joined: August 9th, 2007, 4:04 pm
Location: Bendigo

MK Triton Bullbar Mounting Bracket

Unread post by Donisgood » November 18th, 2007, 8:11 am

Hi Guy's, Does anyone have or know where I can get a Triton Bullbar mounting bracket for an alloy original bullbar 2000/1 (should be all the same MK)
Any help wopuld be good!
Yes I have bought one without the brackets and now my Triton is just sitting there until I find a set or may have to get one engineered?
Thanks Dion
MK Triton 2000mdl 4x4 GLS V6 3.0l
Alloy Bullbar/Chrome Rear barstep/Steps/4x 100watts Hella's on Rollbars/Canopy/DVD,GPS,Bluetooth,TV,Rev Camera/ RANCHO RS5000's all round! :thumb:

Donisgood
Here and there
Posts: 92
Joined: August 9th, 2007, 4:04 pm
Location: Bendigo

Unread post by Donisgood » November 20th, 2007, 6:20 pm

Bump please anyone that can help me out!!!
Thanks Dion
MK Triton 2000mdl 4x4 GLS V6 3.0l
Alloy Bullbar/Chrome Rear barstep/Steps/4x 100watts Hella's on Rollbars/Canopy/DVD,GPS,Bluetooth,TV,Rev Camera/ RANCHO RS5000's all round! :thumb:

westernstar
Been here a while
Posts: 409
Joined: August 2nd, 2007, 11:14 pm
Location: Central West NSW

Unread post by westernstar » November 20th, 2007, 7:49 pm

I bought a bar without the bracket too.... had to get one through ARB (damn airbags - couldnt fab one up)

Donisgood
Here and there
Posts: 92
Joined: August 9th, 2007, 4:04 pm
Location: Bendigo

Unread post by Donisgood » November 21st, 2007, 5:38 pm

Yeah its looks like I will have to get one made up some how!
Does anyone have a drawing of their bracket for an MK triton TJM or Standard bull bar?
I have spoken to TJM (Who made them and branded the for the Triton) and they said they carn't get them I would have to buy a new bullbar :(
No help from anyone that I have emailed with posts about the bar or barckets.
Thanks anyway Dion
ARB have said that their's are different to the TJM bracket?
MK Triton 2000mdl 4x4 GLS V6 3.0l
Alloy Bullbar/Chrome Rear barstep/Steps/4x 100watts Hella's on Rollbars/Canopy/DVD,GPS,Bluetooth,TV,Rev Camera/ RANCHO RS5000's all round! :thumb:

Vineboy
Been here a while
Posts: 189
Joined: June 20th, 2006, 4:17 pm
Location: Central West NSW

Unread post by Vineboy » November 21st, 2007, 6:48 pm

I have an ARB steel non-winch bar if you want photos.
MK Dual Cab Triton. Like every other standard one:(
84 HJ47 Landcruiser
00 V70 T5 Turbo Volvo

Donisgood
Here and there
Posts: 92
Joined: August 9th, 2007, 4:04 pm
Location: Bendigo

Unread post by Donisgood » November 22nd, 2007, 8:09 am

Vineboy wrote:I have an ARB steel non-winch bar if you want photos.

Thanks Vineboy, But ARB have told me that their brackets are different to the TJM ones. So I will just have to leave it wired up with the 4 bolts from the side arms holding it in place, Not very safe but that the best I can do until I can get a pic or drawing of one for a TJM/Standard one.
Thanks for your help anyway
Cheers Dion
MK Triton 2000mdl 4x4 GLS V6 3.0l
Alloy Bullbar/Chrome Rear barstep/Steps/4x 100watts Hella's on Rollbars/Canopy/DVD,GPS,Bluetooth,TV,Rev Camera/ RANCHO RS5000's all round! :thumb:

Donisgood
Here and there
Posts: 92
Joined: August 9th, 2007, 4:04 pm
Location: Bendigo

Unread post by Donisgood » January 29th, 2008, 8:38 am

This a special THANKYOU to Dave who PM me and faxed over a copy of the full diragram in detail of the bracket for my Triton's bullbar.

Thankyou once again and isnt it great this site as this will have saved me many hours $$ getting it right.

Cheers Dion
MK Triton 2000mdl 4x4 GLS V6 3.0l
Alloy Bullbar/Chrome Rear barstep/Steps/4x 100watts Hella's on Rollbars/Canopy/DVD,GPS,Bluetooth,TV,Rev Camera/ RANCHO RS5000's all round! :thumb:

DeerHunter
I'm new, be nice!
Posts: 1
Joined: January 5th, 2009, 11:09 am

Triton Bullbar brackets

Unread post by DeerHunter » January 5th, 2009, 12:29 pm

I too have purchased a TJM bullbar for my Triton without the mounting brackets. TJM quoted me around $600 for the brackets alone. Not a bad mark-up when you are looking at $20 bucks worth of steal. Can you please send me a copy of the bracket plans so i can make a set for my MK. My e-mail is dingoking1@bigpond.com Any help in this matter would be greatly apreciated :cry:

Jimmy669
I'm new, be nice!
Posts: 1
Joined: February 15th, 2014, 11:42 am

Re:

Unread post by Jimmy669 » February 15th, 2014, 11:48 am

Hi donisgood, I also have a 2000 model dual cab Triton, and I'm needing the same brackets for the bullbar. Would be muchly appreciated if you could help, if you still had those drawings.

Cheers James

Return to “General Mitsubishi”