show us your disco

The original 4WD
Nowonmai
I'm new, be nice!
Posts: 6
Joined: June 22nd, 2009, 2:39 pm

Mine

Unread post by Nowonmai » November 10th, 2009, 6:39 am

Image


Image

Fairly stock at the moment but since these photos were taken Ive given her some 31 x 11.5's, compressor, 3 battery system, cb, fire ext etc.
There is no Devil, that's just God when he's drunk.

brooksy
Moderator
Posts: 3415
Joined: August 4th, 2005, 8:10 am

Unread post by brooksy » November 15th, 2009, 8:43 am

Some pics of mine that I sold earlier this year to a bloke site unseen. It had just about everything completely custom except for the front ARB Sahara bar. It made a lot of 5+" lifted rigs look very ordinary in it's time. I miss it except for the fuel bills.

http://www.4wdmonthly.com.au/forum/show ... 700&page=4

TOO LAZY TO POST THE PICS :crazy:


brooksy
C44F - Custom 4x4 Fabrications
0400 443 802

Nic Frame
Posts: 10
Joined: September 25th, 2009, 1:37 pm
Location: Sydney

Unread post by Nic Frame » February 24th, 2010, 11:10 am

Here's mine - it's pretty standard, but a work in progress...

Image
Better to regret the things you've done than the things you haven't done!

markwright
I'm new, be nice!
Posts: 1
Joined: September 22nd, 2009, 1:25 am

Unread post by markwright » March 1st, 2010, 11:22 pm

Thought id finally contribute here haha

This is my 91 Disco 2 door, 3.5i manual :)
Bought with a long range tank, alloy bully, P plater spec sound system and horrible tint...
since then have lifted 2" with kings HD coils, bilstein long shocks
CB, bonnet sprayed with matte black hump
31" MTZ's on 8" 25+ offset sunnys.. which love grinding on my guards
have very recently started guard chop and flaring
Here you go
Image

Ouch,
Image

Image

Image

my attempt at guard chop and flaring :), only had time for the one corner today
Image

disco_thrasher
Been here a while
Posts: 142
Joined: December 26th, 2006, 6:38 pm
Location: @ work

Unread post by disco_thrasher » March 5th, 2010, 12:54 pm

I got a Disco 2 TD5 2000 which am very happy with and has kept me very busy


4.5" custom springs
long travel Procomp shocks
35"Trepadors
Procomp rock crawler rims 16x8
Dual ARB locked
ashcroft cv's and front axels
maxi drive rear axels
49% maxi drive reduction gears
uhf hand held can be connected to car for further range
rear tail shaft conversion
egr replacement
steel braided brake lines
ext abs lines
modified watts link
low coolant alarm
engine temp managemnt
brake controller
warn xpc9500
IFP extreme spotties
front and rear diff guards
bash plate
custom rear bar and side protection
rear 1/4 cut
custom rock sliders
GBR 4:14 diffs
endless air
arb bull bar



Image
Image
Image
Image
Image
Image
Image
Image
Image







http://img85.imageshack.us/my.php?image=picture425x.jpg
http://img638.imageshack.us/my.php?image=picture414.jpg
[color=black]TD5 disco2 4 big black things which are 35" stuff locked up front and out back 49%maxidrive rock crawler reduction gears 4.14:1 diffs and others stuff too yada yada[/color]

disco_thrasher
Been here a while
Posts: 142
Joined: December 26th, 2006, 6:38 pm
Location: @ work

Unread post by disco_thrasher » March 5th, 2010, 1:00 pm

some more when i had 33's and 2"lift
Image
Image
[color=black]TD5 disco2 4 big black things which are 35" stuff locked up front and out back 49%maxidrive rock crawler reduction gears 4.14:1 diffs and others stuff too yada yada[/color]

BMKal
Part of the furniture
Posts: 1387
Joined: February 8th, 2007, 2:50 pm

Unread post by BMKal » March 5th, 2010, 1:09 pm

markwright wrote:Thought id finally contribute here haha

This is my 91 Disco 2 door, 3.5i manual :)
Bought with a long range tank, alloy bully, P plater spec sound system and horrible tint...
since then have lifted 2" with kings HD coils, bilstein long shocks
CB, bonnet sprayed with matte black hump
31" MTZ's on 8" 25+ offset sunnys.. which love grinding on my guards
have very recently started guard chop and flaring
Here you go
Image

Ouch,
Image

Image

Image

my attempt at guard chop and flaring :), only had time for the one corner today
Image

Not a bad looking Disco mate. Thought I'd seen it around town.

zuno555
Getting to know the place
Posts: 13
Joined: May 11th, 2008, 2:03 pm

Unread post by zuno555 » March 6th, 2010, 4:26 pm

The camo tractor.....

Image
Image
Image

In the shop at the moment, getting 4.1 diffs and rear KAM etc etc woot

ERASER
Need to get out more
Posts: 2770
Joined: August 1st, 2008, 9:37 pm

Unread post by ERASER » March 6th, 2010, 9:02 pm

zuno555 wrote:The camo tractor.....

Image
Image
Image

In the shop at the moment, getting 4.1 diffs and rear KAM etc etc woot
That looks bloody tops!

KillaMav
Avid Poster
Posts: 872
Joined: April 16th, 2007, 6:42 pm
Location: Noosa / Brisbane

Unread post by KillaMav » August 3rd, 2010, 2:10 pm

disco_thrasher wrote:some more when i had 33's and 2"lift

Image

Is that the top of Big Red at glasshouse? If so good work to get to that point.
[b][color=Black][url=http://www.4wdmonthly.com.au/forum/f27/killamavs-swb-maverick-43915/]Members Rigs[/url][/color][/b][font=Lucida Sans Unicode][b][size=134][color=DarkGreen][size=84][color=Lime][color=Black] [url=http://www.4wdmonthly.com.au/shed/index.php?id=1597&im=1]Shed[/url][/color][/color][/size][/color][/SIZE][/b][/font]

bluelightdisco
Been here a while
Posts: 134
Joined: March 1st, 2010, 6:50 pm
Location: Harwood NSW

Re: show us your disco

Unread post by bluelightdisco » November 12th, 2010, 9:04 pm

here is my old bus
32 inch MTZ's
2 inch king springs
dobinsons shocks
custom exhaust
etc
got big plans soon stay tuned!
You do not have the required permissions to view the files attached to this post.

disco_thrasher
Been here a while
Posts: 142
Joined: December 26th, 2006, 6:38 pm
Location: @ work

Re: show us your disco

Unread post by disco_thrasher » November 15th, 2010, 3:56 pm

my TD5 D2
Image

cheers Kelvin

mickadisco
Been here a while
Posts: 182
Joined: February 24th, 2008, 9:14 am
Location: glen iris

Re: show us your disco

Unread post by mickadisco » December 2nd, 2010, 7:40 pm

video update on my disco in the process of changing a few things,changing the front bar it just has a old bar on the front to keep it drivable without getting into trouble,,fitted flares and larger tyres,next thing is to upgrade the steering bars and diff gears even know it doesnt seem to struggle with the simex
Image

Psimpson7
Moderator
Posts: 499
Joined: December 31st, 2007, 10:49 am
Location: SE QLD

Re: show us your disco

Unread post by Psimpson7 » December 8th, 2010, 5:23 pm

Ok now we have one of these too, here are a couple of pictures of it

:) Must admit both my GF and I love it.

Its a 8/2003 D2a v8 manual

Image

Image

BMKal
Part of the furniture
Posts: 1387
Joined: February 8th, 2007, 2:50 pm

Re: show us your disco

Unread post by BMKal » December 9th, 2010, 2:38 pm

Psimpson7 wrote:Ok now we have one of these too, here are a couple of pictures of it

:) Must admit both my GF and I love it.

Its a 8/2003 D2a v8 manual

Image

Image
Nice looking Disco there mate. The bar suits it well.

Return to “General Land Rover”