1 post • Page 1 of 1
- I'm new, be nice!
- Posts: 4
- Joined: September 16th, 2015, 12:58 pm
- Location: Gulgong, NSW
I've recently fitted a Redarc Tow-Pro Elite to my 2015 Colorado LTZ. My original intention was to fit the switch in one on the switch blanks, but by the time the blank is modded to fit the switch there's nothing left of the lugs to hold the blank in the dash. I've mounted the remote switch in the cavity below the steering column temporarily, which is difficult to see & use whilst on the road. Has anyone fitted a TowPro & found a solution for the switch position without drilling a hole in the dash?