I have an 80 series and the front diff is bent. Took it to a truck alignment place and they reckon it’s the worse they have seen. It’s 2+ degree camber instead of a neg basically should look like this \-/ but look like this /-\.
Question is to repair or not to repair.
I live in cairns. Anyone know anyone up here to straighten the diff.
I did have a quick look around and see superior engine get make a bare housing but seems like a lot of stuffing around welding on spring and shock mounts and ball joints etc. but I think I’ll be pushing it up hill trying to find a straight 80 diff.
Anyone had previous experience with bent diffs even in other vehicles? I might even be able to get it done on insurance. Happened on the PDR.
2 posts • Page 1 of 1
- Here and there
- Posts: 90
- Joined: December 23rd, 2015, 8:30 pm
will probably cost you more to get it repaired and straightened than you can get one from the wreckers for, there's one on ebay atm under $300 https://www.ebay.com.au/itm/Diff-Housin ... SwMYRacNEK