More clearance required - any advice/exp with control arms?

953
Been here a while
Posts: 248
Joined: March 28th, 2007, 10:07 pm

More clearance required - any advice/exp with control arms?

Unread post by 953 » May 21st, 2016, 5:39 pm

Bash plates have been a great acquisition for me, even though I don't go out looking for the hard stuff.
I have 32" tyres at the moment & would like to air down for more traction & comfort but scrape fairly regularly with 40psi on the tracks.
My prob is, the lower control arms also scrape quite a bit &, after talking to a few different suspension specialists, its agreed that taller tyres are the only way around this, EXCEPT Mcc who say they have an after market control arm that will help my situation.
Anyone know or have any experience's with control arms.
Cheers Dean.

953
Been here a while
Posts: 248
Joined: March 28th, 2007, 10:07 pm

Re: More clearance required - any advice/exp with control ar

Unread post by 953 » May 28th, 2016, 12:54 pm

Anyone ???
Cheers Dean.

ab67
Here and there
Posts: 47
Joined: December 9th, 2012, 9:34 pm
Location: Perth, WA

Re: More clearance required - any advice/exp with control ar

Unread post by ab67 » May 28th, 2016, 1:26 pm

newranger.net has more info

953
Been here a while
Posts: 248
Joined: March 28th, 2007, 10:07 pm

Re: More clearance required - any advice/exp with control ar

Unread post by 953 » June 3rd, 2016, 7:55 pm

thanks ab, will have a look.
Cheers Dean.

Return to “PX Ranger / New BT50”