tyre placard

[rocky8]

G'day...my Daihatsu Rocky F75 doesn't have a tyre placard and i need some info on what tyre sizes it says......

[rocky Damo]

G'day...my Daihatsu Rocky F75 doesn't have a tyre placard and i need some info on what tyre sizes it says......

My tyre placard that is in the glove box has worn away i run pretty standard tyres 215 75 r15

[jg1982]

My F75's tyre placard says 215SR15 or H78-15

[rocky Damo]

My F75's tyre placard says 215SR15 or H78-15
Yep that would be right as that is what i had on 1 year ago but the 215 75 r15 are the same diameter

[KenF]

rocky 8,
Why do you ask?
NSW compliance states 15mm over or under is taboo.
Guess what you are way under in dia! and probably under in load carrying compliance?
Food for thought,
KenF

[rocky8]

KenF I got defected for tyres being 10mm over size by the bloke at the vehicle inspection station (Regency Park S.A.). We couldnt find my tyre placard so he went on the size 215/75/R15....

[KenF]

rocky8,
There is all so a requirement for width and or track off-set (must not be more than 26mm over standard.)
http:/www.rta.nsw.gov.au/registration/downloads/vsi/vsi09_rev40pdf
Might make some sence.
Cheers,
KenF

[rocky8]

wasn't done for width of tyres ....only sidewall height...width is fine....

[rocky balboah]

hey rocky8, ive got a 94 td wide track rocky.. very happy with it exept the ground clearence. who did u see about your lift?

[rocky8]

gday Rocky B...4wd systems in Adelaide did my lift....Unfortunately My Rocky has been defected for being too high so i would recommend just a 2" suspension lift...If u go any higher u will need to get your Rocky approved by an engineer...I'm going to get mine engineered in a couple of weeks....
Cheers...