Vitara Body Lift

[Bison]

Has anyone done a 2" lift to a vitara wagon. I'm looking at having a crack I just wanted to know if it is as easy as the bloke at the 4wd store says. Is there any probs with having to extend wiring or any other tricky issues I should know about. Also the idea is to do the body lift and fit some bigger rubber. I know 235/75 will fit standard but it looks a little weird and having a little extra room between the rubber and the guards is what I'm after. I have been given the green light from the minister of finance to get some M/T's and some black steel rims. Finally the beast will look like it belongs in the bush. Do you reckon this is the right way to go. Any ideas or tips would be appreciated. Cheers!

[Just Cruizin]

How much are they charging you for the BL, I sell them for a Vitara for $220 SWB and $235 LWB both including postage. (bumper mounts not included though). They are very easy to fit, you'll need longer front brake hoses though and if you already have spring lift this would be advised anyway. The transfer lever may need a slight bend or the hole enlarged slightly. Is your vehicle EFI because the cast alloy inlet pipe will need to be raised at one end by 25mm. The fuel filler hose will be long enoughbut will need adjustment and it would pay to get some rubber to go under the guards and between the top of the radiator and body.

Check out this thread on Outers

Outer Limits 4x4 Board :: View topic - Vitara body Lift - Does the floor pan crack? (http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=112847)

and heres my add

http://www.4wdmonthly.com.au/forum/f17/suzuki-body-lifts-39658/

cheers
Greg

[jimmyatv]

JC, i am going to get a suspension lift then soon after i was going to get a boddy lift off you, but with much the same questions as above. Most answered now so dont have to ask:thumb:. Is it the same for a swb?

[Just Cruizin]

Yes the SWB exactly the same just less two non-fixed body mounts