PDA

View Full Version : 80series radius arms Q


sudso
13-09-2007, 11:56 PM
Whats the size of 80s front radius arm bushes?
The outer diameter and the pin bolt diameter.
Also are the bushes at the back of the arms the same size?
cheers, sudso

HDJ105
14-09-2007, 09:02 AM
Also are the bushes at the back of the arms the same size?
cheers, sudso

I can tell you the rear bushes have a smaller OD than the front ones.

sudso
15-09-2007, 01:12 AM
I measured the front bushes on my old Bundy today, the outer dia. is about 76mm.
Are Bundy radius arm bushes the same as 80s?

HDJ105
15-09-2007, 10:46 AM
I measured the front bushes on my old Bundy today, the outer dia. is about 76mm.
Are Bundy radius arm bushes the same as 80s?

I have an aftermarket offset caster bush for an 80 here, OD is ~60.2mm, the ID is 16.2mm.

sudso
15-09-2007, 12:35 PM
I have an aftermarket offset caster bush for an 80 here, OD is ~60.2mm, the ID is 16.2mm.Hmmm, same dimensions as Patrols.
The early coil sprung Bundys must have larger bushes, unless I measured it wrongly. They were still on the car when I measured one.