PDA

View Full Version : Range Rover Specs

Rocky4.4
03-07-2007, 05:11 PM
Any Technical specs Welcome.
Rocky4.4
03-07-2007, 05:31 PM
http://i129.photobucket.com/albums/p227/RockyNL/spec1.jpg
http://i129.photobucket.com/albums/p227/RockyNL/lubricant.jpg
Rocky4.4
04-07-2007, 07:45 PM
Does Anyone Have the Torque specs for the Leyland 4.4 Motor?? Mainly the Head and Valley covers??

Thanks Tim.
mark4130
04-07-2007, 08:37 PM
4.4l Torque wrench settings

Cylinder Head bolts .................. 70lb/ft
Connecting rod cap nuts ........... 35lb/ft
Rear main bearing cap bolts........ 70lb/ft
Other main bearing cap bolts...... 55lb/ft
Inlet manifold bolts................... 30lb/ft
Inlet manifold gasket clamp bolts. 10lb/ft
Exhaust manilfold bolts.............. 15lb/ft
Rocker pivot nuts..................... 11lb/ft
Sump bolts.............................. 10lb/ft
Sump drain plug....................... 15lb/ft
Baffle plate bolts..................... 22lb/ft
Oil pickup to engine block bolts... 10lb/ft
Oil pump cover bolts................. 10lb/ft
Pressure relief valve plug........... 35lb/ft
By-pass relief valve plug........... 35lb/ft
Timing cover bolts................... 22lb/ft
Crankshaft pulley bolt............... 160lb/ft
Crankshaft pulley to balance ring bolts...22lb/ft
Camshaft centre bolt............... 45lb/ft
Rocky4.4
05-07-2007, 06:05 AM
Thanks Mark, Thats a great help as i have to replace my head gaskets as oils leaking out of one side.:(
mark4130
05-07-2007, 09:20 AM
No probs Tim

Ive just done my head gaskets, overheating problems.If you have the time its worth reseating the valves.I had two that where out of shape and hair line cracks which wasnt visible til i cleaned them up.Also had a broken rocker pivot and 1 bent pushrod,yet it still ran ok bar the overheating.
But now it run a lot smoother and no more heating probs.

Good luck with yours

http://i96.photobucket.com/albums/l174/markh4130/P1010843.jpg

Mark
Rocky4.4
05-07-2007, 04:37 PM
I'm gunna pull the heads off next week and get it all put though an Acid bath then see what i have to work with.:(
mark4130
15-07-2007, 05:09 PM
3.5l range rover engine specs
http://i96.photobucket.com/albums/l174/markh4130/rangeroverspecs.jpg
mark4130
15-07-2007, 05:12 PM
http://i96.photobucket.com/albums/l174/markh4130/Image2.jpg
mark4130
15-07-2007, 05:14 PM
http://i96.photobucket.com/albums/l174/markh4130/Image3.jpg
http://i96.photobucket.com/albums/l174/markh4130/Image.jpg
Busta-P
15-07-2007, 05:27 PM
man that's awesome, just what i was after in my thread. thanks.

cheers

Busta-P