My CJ...3d one.

[FlexyCJ]

Yeah, its on Brenno's topic, so i'll make my own.

This what i've done so far.

New Skyjacker Platinum Shocks in, RCI Aluminum Fuel Cell, new mounts for shocks. And 4 link rear.

http://i6.photobucket.com/albums/y248/FlexyCJ/evil****er.jpg

http://i6.photobucket.com/albums/y248/FlexyCJ/evil****er1.jpg

Yeah i made a Evil F*cker. :P

http://i6.photobucket.com/albums/y248/FlexyCJ/wtfskoot1.jpg

Any idea anyone ?

[wooders]

Suggestions?
How about Wheels/tyres & a Motor? ;)

Ok what size wheels would be the plan? To justify Rockwalls you'd REALLY want at least 40"s....and then the wheel base looks a bit short....
Unless there is more tralngulation on the upper arms I think you'd need panhard for lateral control.
Not real keen on the bends in the roll cage suppors - might look bling but not rally adding much structural strength.
Also add double diagonals and a harness bar....
Why leafs at the front?

Oh and how about a stinger?

[FlexyCJ]

Suggestions?
How about Wheels/tyres & a Motor? ;)

Ok what size wheels would be the plan? To justify Rockwalls you'd REALLY want at least 40"s....and then the wheel base looks a bit short....
Unless there is more tralngulation on the upper arms I think you'd need panhard for lateral control.
Not real keen on the bends in the roll cage suppors - might look bling but not rally adding much structural strength.
Also add double diagonals and a harness bar....
Why leafs at the front?

Oh and how about a stinger?


I won't be running rockwells, maybe Mogs. The tires, don't know yet. probably 37-42s. It got an engine, cummies 6. ;) I'm fixing the front soon, puttin 3 link front. I will be making a stinger later. Thanks for the suggestions, lol.

[wooders]

Ahh mogs - Much better ;)
Although a suspect a 3 link wouldn't be suitable with mogs - the portals will result in massive axle wrap - and have been known to rip brackets off the diff - stick with 5 link for the mogs....Just my 2cents ;)
Also remember to plan for 20" rims ;)

[FlexyCJ]

Ahh mogs - Much better ;)
Although a suspect a 3 link wouldn't be suitable with mogs - the portals will result in massive axle wrap - and have been known to rip brackets off the diff - stick with 5 link for the mogs....Just my 2cents ;)
Also remember to plan for 20" rims ;)


meh...yeah mogs are much better imo. 5 link front ? mmky.

20'' rims, yeah i know. ;)

http://www.killeraxles.com/html/used_unimog_axles.html ;D

[Gojeep]

I agree there with Wooders on the trianglation of the arms. You must not have less than 40* degrees angle between them if you want to run without a panhard link.

[Phat Mav]

Well, for starters the steering wheel is on the wrong side..... ;D

Patrick