nj pajero Q'S

[shane0o7]

ok have a few questions:
1: motor is 3.5ltr v6 it says dohc but the brother says it is qad cam! he owns a 99 mod and is 3.5ltr but the head size on mine is alot bigger then his? is mine quad cam or twin?

2: the passenger side wheel i can rock back and forths holding the top! feels like wheel bearings are loose! there is no movement in the wish bone etc! are these easy to do? and is there anywhere to get an online manual with the way to do it? is it bad to keep driving it?

3: the car is painted green! and yes the same thing has happened that happens to them all! the clear coat has come off! why does this happen? and what have you done to repair this? cheers shano!

[BMS]

ok have a few questions:
1: motor is 3.5ltr v6 it says dohc but the brother says it is qad cam! he owns a 99 mod and is 3.5ltr but the head size on mine is alot bigger then his? is mine quad cam or twin?

2: the passenger side wheel i can rock back and forths holding the top! feels like wheel bearings are loose! there is no movement in the wish bone etc! are these easy to do? and is there anywhere to get an online manual with the way to do it? is it bad to keep driving it?

3: the car is painted green! and yes the same thing has happened that happens to them all! the clear coat has come off! why does this happen? and what have you done to repair this? cheers shano!


1: Yours is twin cam, dohc (2 cams on each cylinder head) his is sohc,
single cam(1 per head).

2:Yes you can stuff your bearings.

3:Too much hot sun and not enough tlc. Respray

bms

[fire_boy]

Q.2. = yes, there are manual online, but they can be hard to find. If you google them you come up with a lot, but there book for you to buy and in amongest them all are some online PDF file ones (if I can find the one I was looking at I will post the site on here for you). Yes they are easy to do as long as you have the right tools.

Q.3. = as above, Mits of all modles between 90-97 have the same problem. I was looking at a US site on it, and over that time peroid there was something about the paint used. The only way to have it fix is resprayed before it dose damage to the colour paint under it.

[shane0o7]

cheers guys for the answers!